Mapping & CORS GNSS

click to review GIS GNSS hardware

click for permanent GNSS solutions

S500 GIS GNSS Receiver

Compared to traditional GIS products, the S500 is an intelligent, high precision data acquisition receiver that can be used without the need to hold it in your hand and therefore offers greater freedom of movement and flexibility.
Thanks to the internal web interface, the receiver can be configured and prepared to receive RTK differential corrections and ready to be connected to any software for Survey or GIS

The S500 offers high-precision positioning and is equipped with a high speed 4G module. The positioning is so fast and reliable that it can also be used by vehicles moving at high speed. S500 works with all 4 satellite system (GPS, Glonass, BeiDou, Galileo), support access to external differential RTK signal to get centimeter level positioning results.
Rubber protective cover, increase the protection of the device, non-slip and no damage, the whole device protective class reaches IP67, and it resists 1.2m hard ground drop.

Want more information about this product? check out the manufacture technical sheet

S580 is a compact and lightweight GNSS receiver, with outstanding performance and centimeter accuracy. S580 tracks dual frequency signals and works with all satellite systems (GPS, GLONASS, BeiDou, Galileo and QZSS)
Compared to traditional GIS products, the S580 is a high-precision, intelligent data acquisition receiver, that can be worn or attached to the pole, offering greater freedom of movement and flexibility. The S580 can communicate with an external device such as a tablet, smartphone or PC via Bluetooth and Wi-Fi.

Using the internal web interface, or through the Cube-connector APP, the receiver can be configured and prepared to receive RTK differential corrections and ready to be connected to any survey or GIS software. The rubber protection cover, increase device protection, non-slip and no damage, the whole device protection class reaches IP67, and resists 1.2m drops on hard surfaces
The S580 was designed as an RTK rover receiver to receive differential corrections from the Network. However, thanks to the external Stonex SR02 radio, the receiver can also receive RTK corrections, from a base that transmits them via UHF radio modem, in the 410-470 MHz frequencies.

Want more information about this product? check out the manufacture technical sheet

SC600+ is a multifunctional, multi-constellation GNSS, equipped with dual processors and engineered to achieve low power consumption. Its main feature is the presence of 1408 channels, and in addition its reliability and accuracy are perfected by the anti-jamming technology
SC600+ is ideal for static applications such as CORS, monitoring, and as a base station; it has high connectivity, is equipped with dual-frequency UHF radio, and has GSM LTE service available.
This receiver is also very suitable for kinematic surveying and positioning; in fact, the ability to connect two external GNSS antennas allows for GNSS position and direction of movement and using the available web interface it is also possible to connect to the SC600+ via Bluetooth or via Wi-Fi.

Want more information about this product? check out the manufacture technical sheet

SC2200 is a very advanced receiver, its use ranges numerous professional applications, it is the ideal solution for the realization of GNSS Network and Monitoring measurement, when high precision and maximum reliability are needed.
The new SC2200 is equipped with an Interference Mitigation Technology that allows you to measure the RF spectrum and applies filters to ensure the quality of GNSS measurements, even in interfering environments.

Want more information about this product? check out the manufacture technical sheet

SC400A is a multipurpose GNSS receiver. It can be used for static applications such as CORS, Monitoring or as a base station. It can also be coupled to kinematic surveys and positioning as Rover RTK.
This receiver is equipped with an Interference Mitigation Technology that allows you to measure the RF spectrum and applies filters to ensure the quality of GNSS measurements, even in interfering environments.

Want more information about this product? check out the manufacture technical sheet

SA65 is a compact GNSS antenna, perfect as a rover antenna but adequately performing for Monitoring applications and for CORS installation. It is able to track all constellations GPS, Glonass, Galileo, Beidou, QZSS, IRNSS and to receive the L-band correction.
SA65 have higt phase center stability, it effectively improves measurement accuracy and provides excellent positioning solutions. It is compatible with all GNSS geodetic receivers on the market and can be used for all static and kinematic measurement applications. The capacity to receive low elevation signals with high gain allows to provide precise and reliable position even in difficult conditions.